New:
Added
USB-FPA drivers for 64-bits OS (Win-7, Vista, XP) . Go
to download page and download the new software with drivers inside.
New: REP430F
replicator
for the MSP430 MCU.
FlashPro2000
flash
programmers for TI's C2000 series MCU (TMS320F24xx, TMS320F28xx, Piccolo,
Delfino).
GangPro-CC and FlashPro-CC
flash programmers for the SoC CC series ChipCon products from
Texas Instruments ( CC1110,
CC1111,
CC2430,
CC2431, CC2510,
CC2511, CC2530 ). The GangPro-CC and FlashPro-CC have a similar
features like the current programmers GangPro430 and FlashPro430
for the MSP430Fxx microcontrollers
have. The Multi-FPA API-DLL allows to program simultaneously up to 96
target devices (GangPro-CC) or 16 target devices (FlashPro-CC). The
IEEE address and serialization can be assigned automatically or can
be taken from the user defined list in the file.
Our
programmers for the MSP430Fxx microcontrollers -
FlashPro430
and GangPro430
supports JTAG, Spy-Bi-Wire and Boot
Strap Loader (BSL) communication interfaces with target device.
The Multi-FPA API-DLL allows to control our programmers
from application software written in Visual C++, Visual
Basic, LABView, DOS-commands etc.
Up to sixteen programmers can be simultaneously controlled from one
PC (via USB ports) that allows to speed-up programming process in production.
NEW!: Did you loose the DCO constants in the Info-A
of the MSP430F2xx
microcontroller? It is not a problem. The FlashPro430
and GangPro430 programmers can recalibrate the DCO
and restore the DCO constants using access via JTAG or Spy-Bi-Wire.
No extra hardware is required.
Each DCO frequencies are calibrated with tolerance +/-1% to 1, 8,
12 and 16 MHz and DCO constants are saved in memory. Custom defined
DCO frequencies from 100 kHz and up can be calibrated if required.
DCO in the MSP430F1xx and MSP430F4xx can be calibrated also.
NEW!:
The
FlashPro430 (software version 4.2-2 and up) can recalibrate
the DCO and restore the DCO constans even if
the security fuse is blown using access via BSL.
|
The
"FlashPro430"-
the USB MSP430 JTAG /Spy-Bi-Wire / BSL Flash Programmer,
currently the fastest programmer on the market allows communication
with the programmed device at a speed of up to 350 kb/s, which is over
35 times faster than with standard BSL. The effective speed using the
JTAG interface is about 29 kbytes/s, or 20kbytes/s using the BSL interface.
Supported MSP430.DLL library allows use the USB programming adapter
with the IAR, Quadravox or CrossStudio IDE debugging software. 
...more
NEW!:
Support for the TI's MSP-FET430UIF adapter added to the FlashPro430
API-DLL that allows to control TI's adapter from external software
written in Visual C++, Visual Basic, LabVIEW etc.
Custom
defined programming sequences uses script file added.
Command
line interpreters added for the Multi-FPA API-DLL
that allows to use the command prompt techniques for remote control
up to sixteen programmers.
MSP430Fxx
microcontrollers
and 