|
Full
Speed USB 1.1 (12 Mb/s) communication interface.
Up
to 6 MSP430Fxx can be programmed simultaneously from one GangPro430.
Six MSP430 with 60 kB Flash each can be
programmed via JTAG simultaneously
in 5 seconds.
60
kB Flash can be erased, blank checked, programmed and verified in 8 seconds
using JTAG interface, and in 12 seconds using BSL interface..
Up to 8 GangPro430 can be connected to one
PC.
48 pcs of the MSP430 with 60 kB Flash each can be programmed simultaneously
in 5 to 7 seconds using Multi-FPA API-DLL and 8 GangPro430 FPAs.
Support
the JTAG, Spy-Bi-Wire
and BSL interfaces.
Support
all MSP430Fxx microcontrollers. See MSP430 list below.
NEW!
Automated DCO calibration - up to eight DCO frequency can be calibrated
and related DCO registers saved in the FLASH INFO memory.
NEW!
Self Test program that allows to check programmer functionality with customer's
fixture and target device.
User
defined programming sequence uses script file. No programming technique
and language knowledge is required.
No code size limitations.
Blow the JTAG security fuse capability.
Target device can be powered from the programming adapter (programmable
Vcc from 2.2V to 3.6V step 0.2V)
or from external source (2.2V to 3.6V).
Easy to use WindowsTM based software.
Programmer
accept TI (*.txt), Motorola (*.s19, *.s28, *.s37), Intel (*.hex) and *.d43
and *.a43 data files for programming.
Combine code files capability.
Lock setup capability, useful in production.
Unique serial number assign capability. Software package can assign and
automatically increment serial number, model type and revision. Serial
Number with or without an automatically inserted current date can be stored
in the FLASH memory in HEX, BCD or ASCII format.
Log file capability allowing to review information about the flashed target
devices.
Can be connected to the single target device with the standard TI's JTAG
pinhead connector. FlashPro430 software can be used with the GangPro430
programming adapter to reach a single target device.
MSP430.DLL library allows use the USB Gang Adapter as an JTAG In-Circuit
Debugger with single target's device like a FET (Flash Emulation Tool)
with the IAR, Quadravox,
NoICE or CrossWorks
IDE debugging software.
The USB-MSP430-FPA-GANG adapter can be used with the FlashPro430
software that allows to access only one target device via JTAG interface.
See the FlashPro430
feature for details with JTAG communication speed 1Mb/s and 400kb/s.
Multi-FPA
API-DLL software package can control up to eight GangPro430 FPAs (working
simultaneously) from other programs. Using eight GangPro430 FPAs the programming
time of the 48 target devices is almost the same like programming time
of the six target devices programmed from one FPA.
Perfect for production usage.
NEW!
Command line interpreter shell for the Multi-FPA API-DLL that
allows to use the command prompt technique for remote control up to eight
GangPro430 FPAs (working simultaneously).
NEW!
MyGP430Prg software package in Visual C++ and Visual
Basic 6.0 intendend to help users create their own application uses
API-DLL by providing a simple starting point.
Source code for the Multi-FPA API-DLL demo written in Visual C++.net,
Visual Basic.net, LABView 7.1, and for the DOS-command
application. Download
fully functional software
from our website and try it.
Programmer
has been tested and found to
comply with FCC and CE requirements. See attached reports:
FCC-1, FCC-2,
FCC-3,
CE-1, CE-2
List of the supported
MSP430 processors:
MSP430F110,
MSP430F1101, MSP430F1101A, MSP430F1111A, MSP430F112, MSP430F1121, MSP430F1121A,
MSP430F1122, MSP430F1132, MSP430F122, MSP430F1222, MSP430F123, MSP430F1232,
MSP430F133, MSP430F135, MSP430F147, MSP430F148, MSP430F149, MSP430F1471,
MSP430F1481, MSP430F1491, MSP430F155, MSP430F156, MSP430F157, MSP430F167,
MSP430F168, MSP430F169, MSP430F1610, MSP430F1611, MSP430F1612
MSP430F2001,
MSP430F2002, MSP430F2003, MSP430F2011, MSP430F2012, MSP430F2013, MSP430F2101,
MSP430F2111, MSP430F2112, MSP430F2121, MSP430F2122, MSP430F2131, MSP430F2132,
MSP430F2232, MSP430F2234, MSP430F2252, MSP430F2254, MSP430F2272, MSP430F2274,
MSP430F233, MSP430F235, MSP430F2330, MSP430F2350, MSP430F2370, MSP430F2410,
MSP430F2416, MSP430F2417, MSP430F2418, MSP430F2419, MSP430F247, MSP430F2471,
MSP430F248, MSP430F2481, MSP430F249, MSP430F2491, MSP430F2616, MSP430F2617,
MSP430F2618, MSP430F2619
MSP430F412,
MSP430F413, MSP430F415, MSP430F417, MSP430F423, MSP430F4230, MSP430F423A,
MSP430F425, MSP430F4250, MSP430F425A, MSP430F4260, MSP430F427, MSP430F4270,
MSP430F427A, MSP430F435, MSP430F4351, MSP430F436, MSP430F4361, MSP430F437,
MSP430F4371, MSP430F447, MSP430F448, MSP430F449, MSP430F4793, MSP430F4784,
MSP430F4793, MSP430F4794, MSP430FE423, MSP430FE423A, MSP430FE425, MSP430FE425A,
MSP430FE427, MSP430FE427A, MSP430FD4250, MSP430FG4260, MSP430FG4270, MSP430FG437,
MSP430FG438, MSP430FG439, MSP430FG4616, MSP430FG4617, MSP430FG4618, MSP430FG4619,
MSP430FW423, MSP430FW425, MSP430FW427
See documentation
for details.
Price:
see price list
Package contains:
- USB GangPro430 programming adapter
- USB and JTAG/BSL cable
- CD with software and documentation
- GangPro430-JTAG software with serialization
-
GangPro430-BSL software without serialization
- FlashPro430-JTAG software with serialization
- MSP430.dll for debugging (JTAG In-Circuit Debugger)
with IAR-IDE etc.
- Multi-FPA API-DLL for remote control (Gang and
Single options).
Warranty: One year - 
see
details
API-DLL
enlarge... API-DLL enlarge...
SelfTest enlarge...
|
enlarge...
FPA adapter enlarge...
enlarge...
enlarge...
GangSplitter enlarge...
(note: package contains board as above and seven ribbon cables)
JTAG enlarge...
SBW enlarge...
BSL enlarge...
|