|Home| * | Products | * | Downloads | * | Price | * | Contact Us / Distributors |

Documentation and Software Upgrade:

Note:
All our adapters USB-FPA 4.0 and up (USB-FPA 4.x, 5.0 and 6.0) use the same USB drivers. We provide drivers for Win-98SE, Win-ME, Win-2000, Win-XP (32 and 64 bits), VISTA (32 and 64 bits) and Win-7 (32 and 64 bits). When you install software package for desired programmer (FlashPro430, GangPro430, FlashPro-CC, GangPro-CC, FlashPro2000) then the USB drivers are located in the following directory

   C:\Program Files\Elprotronic\Drivers USB-FPA

See the pdf documents for details.

Make sure that you are using the latest software when the newer USB-FPA 6.0 adapter is used. The USB drivers are the same, but the old application software cannot recognize the newer adapter. If you are using DLL in your application, then copy and paste desired DLL from the latest software package to your application. The API-DLL are backward compatible and support the new and all older USB-FPA adapters. Type of the USB-FPA adapters are recognized automatically.

USB-FPA Driver Installer

USB Driver
 Part Number
Revision
 Date File size PDF zip

USB-FPA Driver Installer
Software package contains: Driver Installer and Uninstaller for USB-FPA adapters, pdf document

 


1.010


Dec-28-2011
830kB


download

Software instalation:
   1. Downlad desired software *.zip file.
   2. Unzip the file to a temporary directory.
   3. Run the installation program (Setup.exe) from a temporary directory.
   4. Once the installation program starts, on-screen instructions will guide you through the instalation process.
   5. Restart computer.
Note: In some laptops, like the IBM Think pad, restarting only might not be sufficient to properly install the drivers. Cycling power (turn the power OFF ) has shown to remedy this problem.

Flash Programmers for C2000 series MCU from Texas Instruments
USB * FlashPro2000 * - Flash programmer uses Elprotronic's Flash Programming Adapter ( USB-FPA 4.x, USB-FPA 6.0)

USB FlashPro2000 software
Part Number
Revision
 Date File size PDF zip

FlashPro2000 Software
   (+ documentation + USB drivers)
New: Added USB-FPA Driver installer
Supports F28xx DSPs
Communication via JTAG and SCI-BOOT.
Added support for Piccolo F28032, F28033, F28034, F28035. New version of API (2.00) for Piccolo F2802x.
Added support for F240x, F240xA with communication via SCI-BOOT.
 Added defined Check Sum (Sum, CRC16, CRC32)
Software package contains: FlashPro2000 software, Multi-FPA API-DLL for remote control, LABView 7.1 shell, API-DLL demo (example), source code for the API-DLL demo written in Visual C++.net

CS034X01

1.44

Dec-28-2011
9.0 MB

FlashPro2000 documentation
FlashPro2000 Programmer User's Guide
PM034A01
2
Jun-26-2009
3.4 MB
FlashPro2000 API-DLL User's Guide
PM034A02
1
May-29-2009
700 kB

Flash Programmers for CCxx series devices (Chipcon products from Texas Instruments).
USB * FlashPro-CC * - Flash programmer uses Elprotronic's Flash Programming Adapter ( USB-FPA 4.x, USB-FPA 5.x, USB-FPA-6.x)
USB * GangPro-CC * - Gang Flash programmer uses Elprotronic's USB-FPA-6.x (GANG) adapter

USB FlashPro-CC/GangPro-CC software
Part Number
Revision
 Date File size PDF zip

FlashPro-CC Software
   (+ documentation + USB drivers)
GangPro-CC Software
   (+ documentation + USB drivers)
New: Added USB-FPA Driver installer. Added En/Disable blank check.

CS024X01
CS025X01

2.03

Feb-04-2012
18.5 MB

FlashPro-CC/ GangPro-CC documentation
FlashPro-CC Programmer User's Guide
PM024A01
6
Sep-02-2009
2.1MB
FlashPro-CC API-DLL User's Guide
PM024A02
2
Dec-17-2007
540 kB
FlashPro-CC Command Line User's Guide
PM024A03
1
Aug-17-2007
89 kB

GangPro-CC Programmer User's Guide
PM025A01
5
Jun-19-2009
1.4 MB
GangPro-CC API-DLL User's Guide
PM025A02
2
Dec-17-2007
880 kB
GangPro-CC Command Line User's Guide
PM025A03
1
Aug-17-2007
93 kB
Brochure (FlashPro-CC/GangPro-CC ++)      
4.3MB

GangPro-CC and Production Programming of the CC2430 - Application Note
AN056
1.0
Sep-24-2007
2.0 MB

Flash Programmers for TI's MSP430 MCU uses TI's FET Adapter.
* FET-Pro430 * - Flash programming software uses TI's FET - USB (MSP-FET430UIF), EZ430 or parallel port (MSP-FET430IF) adapter.

Description Part Number Revision Date File size PDF zip

Access key is not required.
FET-Pro430 Lite Software ( FREE )
    (+ documentation + USB drivers)
Supports in fully TI's PP, USB FETs and EZ430 only.
Includes TI's MSP-FET430UIF firmware update. Communication via JTAG and Spy-Bi-Wire. Supports all MSP430 microcontrollers.
New: Support for the new TI DLL version (V3) added. Support for the newest MCU added,
CS014X01


3.03
(MSP430-TI.dll version - 3.2.3.2)
Jan-05-2012
18 MB

( FREE )

download

FET-Pro430 Software with serialization
    (+ documentation + USB drivers)
New: Support for the new TI DLL version (V3) added. Support for the newest MCU added,
CS014X01
3.03
(MSP430-TI.dll version - 3.2.3.2)
Jan-05-2012
32 MB

User's Guide
PM014A01
8
Jun-19-2009
1.5 MB
API-DLL User's Guide
PM010A05
20
Aug-08-2008
930 kB

Brochure
173 kB

Read Me First - Software instalation
26 kB
Ordering Information
65 kB

Flash Programmers for TI's MSP430 MCU uses Adapters from Elprotronic.
USB * Flash-Pro430 * - Flash programmer uses Elprotronic's Flash Programming Adapter ( USB-MSP430-FPA 1.x, 2.0, 3.0, 4.x, 5.0, 6.0)
USB * Gang-Pro430 * - Gang Flash programmer uses Elprotronic's USB-MSP430-FPA-3.0 (GANG), USB-FPA-5.0 (GANG) or USB-FPA-6.0 (GANG) adapter

USB Flash-Pro430/GangPro430 software
Part Number
Revision
 Date File size PDF zip

Flash-Pro430 Software
    (+ documentation + USB drivers)
Gang-Pro430 Software
    (+ documentation + USB drivers)
Software package contains: FlashPro430/GangPro430 software, Self Test software, MSP430.dll for debugging, MSP430-DLL-selector, Multi-FPA API-DLL for remote control, command line interpreter, LABView 7.1 shell, API-DLL demo (example), source code for the API-DLL demo written in Visual C++.net, Visual Basic.net, LABView 7.1 and for DOS-command application, documentation).
Supports JTAG/Spy-Bi-Wire and BSL communication.
New: Added USB-FPA Driver installer

CS010X04
CS015X01

4.83
4.83

Dec-28-2011
Dec-28-2011
36.0 MB

Software / Tools for the FET and IDE software

MSP430.dll for IDE environment (IAR, CCE, CrossStudio...) (+documentation). Supports the newest MSP430 microcontrollers with JTAG and Spy-Bi-Wire interface.
v4.71
(2.4.8.2)
Apr-20-2011
1MB

Flash-Pro430 (USB) documentation

Programmer User's Guide
PM010A04
25
Jul-29-2009
3.4 MB

API-DLL User's Guide
PM010A05
20
Aug-08-2008
930 kB
Command Line User's Guide
PM010A06
0
Apr-12-2007
93 kB

Read Me First - Software instalation
27 kB

Brochure (FlashPro430/GangPro430 ++)
4.3MB

JTAG-BSL Pinout
PD010A05
4
Nov-23-2007
800 kB

Production Automation with Flash Programmers
Nov-02-2004
1.46 MB

Gang-Pro430 (USB) documentation

Programmer User's Guide
PM015A01
14
Jun-19-2009
2.9MB
API-DLL User's Guide
PM015A02
14
May-30-2008
1.5 MB
Command Line User's Guide
PM015A03
0
Apr-12-2007
93 kB

Read Me First - Software instalation
27 kB

Brochure (FlashPro430/GangPro430 ++)
4.3 MB

* Flash Pro430 PP * - Flash programmer uses Elprotronic's  parallel port  programming adapter  (PE010X01 )

Description Part Number Revision Date File size  PDF  zip

FlashPro430-PP Software  (+ documentation)
CS010X02
1.16
Mar-14-2005
7.58 MB

User's Guide
PM010A01
8
Jul-05-2004
1.64 MB

Read Me First - Software instalation
23 kB

Brochure
501 kB

JTAG-BSL Pinout
455 kB

|Home| * | Products | * | Downloads | * | Price | * | Contact Us |